AD8066 |
RFQ for AD8066 Required Field |
 |
| Technical/Catalog Information | AD8066AR |
| Vendor | Analog Devices Inc |
| Category | Integrated Circuits (ICs) |
| Packaging | Tube |
| Amplifier Type | Voltage Feedback |
| Number of Circuits | 2 - Dual |
| Package / Case | 8-SOIC (3.9mm Width) |
| Slew Rate | 180 V/s |
| Gain Bandwidth Product | - |
| Current - Supply | 6.6mA |
| Current - Output / Channel | 30mA |
| Voltage - Supply, Single/Dual (±) | 5 V ~ 24 V, ±2.5 V ~ 12 V |
| Output Type | Rail-to-Rail |
| -3db Bandwidth | 145MHz |
| Current - Input Bias | 3pA |
| Operating Temperature | -40°C ~ 85°C |
| Voltage - Input Offset | 400V |
| Drawing Number | * |
| RoHS Status | RoHS Non-Compliant |
| Other Names | AD8066AR AD8066AR |
| Product | Manufacturers | Pack | D/C |
| AD8066 | Analog Devices | new | - |
The AD8065/AD80661 FastFET amplifiers are voltage feedback amplifiers with FET inputs offering high performance and ease of use. The AD8065 is a single amplifier, and the AD8066 is a dual amplifier. These amplifiers are developed in the Analog Devices, Inc. proprietary XFCB process and allow exceptionally low noise operation (7.0 nV/Hz and 0.6 fA/ Hz) as well as
very high input impedance.
With a wide supply voltage range from 5 V to 24 V, the ability to operate on single supplies, and a bandwidth of 145 MHz, the AD8065/AD8066 are designed to work in a variety of applications. For added versatility, the amplifiers also contain rail-to-rail outputs.
Despite the low cost, the amplifiers provide excellent overall performance. The differential gain and phase errors of 0.02% and 0.02°, respectively, along with 0.1 dB flatness out to 7 MHz, make these amplifiers ideal for video applications. Additionally, they offer a high slew rate of 180 V/µs, excellent distortion (SFDR of −88 dB @ 1 MHz), extremely high common-mode rejection of −100 dB, and a low input offset voltage of 1.5 mV maximum under warmed up conditions. The AD8065/AD8066
Typical Application |
Features |
| Instrumentation Photodiode preamps Filters A/D drivers Level shifting Buffering | FET input amplifier 1 pA input bias current Low cost High speed: 145 MHz, −3 dB bandwidth (G = +1) 180 V/µs slew rate (G = +2) Low noise 7 nV/Hz (f = 10 kHz) 0.6 fA/Hz (f = 10 kHz) Wide supply voltage range: 5 V to 24 V Single-supply and rail-to-rail output Low offset voltage 1.5 mV max High common-mode rejection ratio: −100 dB Excellent distortion specifications SFDR −88 dB @ 1 MHz Low power: 6.4 mA/amplifiertypical supply current No phase reversal Small packaging: SOIC-8, SOT-23-5, and MSOP |
| Parameter | Rating |
|
Supply Voltage Power Dissipation Common-Mode Input Voltage Differential Input Voltage Storage Temperature Operating Temperature Range Lead Temperature Range (Soldering, 10 sec) |
26.4 V See Figure 3 VEE− 0.5 V to VCC+ 0.5V 1.8 V −65°C to +125°C −40°C to +85°C 300°C |
